Production Operation Assignement

In: Business and Management

Submitted By patti88
Words 575
Pages 3
Assignment 6: PRICING
a) Computation of Economic Value of an offering
Mercedes Benz is launching its luxury SUV (called the CDL class) in a market dominated by Lexus GL. The CDL class uses diesel and obtains 25 miles per gallon. The Lexus model, priced at $48000, uses premium gasolene and obtains 20 miles per gallon. Both the models need to be serviced annually but the CDL being a diesel engine requires annual service that is costlier by $100. The life of a diesel engine is typically longer – hence the residual value of a 10 year old CDL is estimated to be $1600 higher than the Lexus.
Assume (i) the average cost of premium gasolene to be $3.00 per gallon (ii) the average cost of diesel to be $3.25 per gallon (ii) the average customer drives 12000 miles per year and (iii) there is no time discount.
What should be the price of the CDL such that the economic value of Benz CDL over Lexus GL (during a 10 year use horizon by a customer) is completely appropriated by Mercedes Benz?
The economic value of CDL:
Price of substitute=48000
Cost saving=(12000/20*3-12000/25*3.25-100)=140
Revenue enhancing=residual value=1600+residual value of GL
Use horizon=10
EV of CDL=48000+140*10+1600+residual value of GL=51000+residual value of GL
The economic value of GL:
Price of substitute=X
Cost saving=(12000/25*3.25-12000/20*3+100)=-140
Revenue enhancing=residual value=residual value of GL
Use horizon=10
EV of GL=X+(-140)*10+ residual value of GL=X-1400+residual value of GL
To make (51000+residual value) equal (X-1400+residual value of GL)
X should be 52400
So the price of CDL should be lower than 52400 dollars such that the EV of CDL is higher than GL.
b) Breakeven Analysis
Nokia has decided to manufacture a special edition cellphone called HiRide for the teen market next year that will be sold with Sprint’s wireless service. For this phone, Nokia’s variable…...

Similar Documents

Management of Productions and Operations

...Competiveness, Strategy & Productivity Nicholas Deters Professor Ardy Management of Productions and Operations BSAB 420 11 December 2012 Abstract In our current society technological advancements, competitiveness, strategy and production are paramount in business relationships since technology advancements continue to gain momentum every day. Competition is what continues to enhance business strategy and production as companies strive to produce the latest technologically advanced product on the market while providing the best service for customer satisfaction at the lowest cost at with a high production rate. In the past few decades computer technology has been responsible for improved customer satisfaction and enhanced business production, spiking the level customer needs and competition between many businesses such as Ford vs. General Motors, Macintosh vs. Microsoft, UPS vs. FedEx, Import vs. Export as the list goes on forever. Whether the competition lie between an automotive industry or the computer industry, any company with a competitive advantage gains the ability to outperform its rivals, providing the ability for company growth and increased revenue. In the business aspect, competition continues to drive the market primarily by producing high quality products at a high output rate by using productivity and strategic road maps to aim for high goals and provide for further organizational achievements. Competitiveness, Strategy, & Productivity ...

Words: 2663 - Pages: 11

Production and Operations Management

...IIBM Institute of Business Management Subject Code-B-107 Examination Paper MM.100 Production and Operations Management Section A: Objective Type Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above Ans:- Inputs in to outputs 2. Continuous Production is: a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above Ans:- The first operation to the finished product 3. Independent demand is: a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above Ans:- Demand that is controlled by the company 4. Enterprise Resource Planning (ERP) has been defined as a: a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above Ans:- Complete Enterprise wide business solution 5. CAD stands for: a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above Ans:- Computer Aided Design 6. Delphi method is the most widely used and accurate method of: a. Demand forecasts b. Exponential forecasts c. Technological forecasts d. All of the above Ans:- Technological forecasts 7. JIT/Kanban systems help......

Words: 356 - Pages: 2

Production and Operations Management

...Production and Operations Management MM.100 Subject Code-B107 Section A: Objective Type & Short Questions (30 marks)  This section consists of multiple choice & Short Notes type questions.  Answer all the questions.  Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts Examination Paper of Production and Operations Management 2 IIBM Institute of Business Management c. Technological forecasts d. All of the above 7. JIT/Kanban systems help......

Words: 1422 - Pages: 6

Syllabus of Production and Operations Management

...MANAGEMENT, MARKETING, AND ENTREPRENEURSHIP SYLLABUS MANAGEMENT 6 PRODUCTION AND OPERATIONS MANAGEMENT I. TITLE OF THE COURSE: Management 6 II. COURSE DESCRIPTIVE TITLE: Production and Operations Management III. COURSE CREDIT: Three (3) units IV. PRE-REQUISITE: Mgmt 1 and Math 4C V. COURSE DESCRIPTION: As a primary business function, along with marketing and finance, the production operations function plays a vital role in achieving the organization’s basic purpose for existence – to satisfy customer needs – by transforming resources into goods and services. Production operations management is important for two reasons: (1) it is the operations function that is primarily concerned with the production of goods and the provision of services, and (2) the operations function typically involves the greatest portion of the organization’s human resources and is responsible for a large portion of the firm’s capital assets. This course introduces the strategic and tactical decisions involved in production operations management. It focuses on the concepts and tools that are used in making decisions as well as trends and global best practices related to the planning and design, operation, and control of production operations systems. VI. COURSE OBJECTIVES: 1. To enable the students to develop a comprehensive understanding of the production/operations function and to appreciate its role as well as its interdependence......

Words: 613 - Pages: 3

Production and Operations Management

...Paper of Production and Operations Management 1 IIBM Institute of Business Management IIBM Institute of Business Management Examination Paper Production and Operations Management MM.100 Subject Code-B107 Section A: Objective Type & Short Questions (30 marks)  This section consists of multiple choice & Short Notes type questions.  Answer all the questions.  Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts Examination Paper of Production......

Words: 1445 - Pages: 6

Optimization in Production Operations

...Optimization in Production Operations Optimal “Lean Operations” in Manufacturing By Carlos W. Moreno © 2005-06 Ultramax Corporation Oct. 5, 2006 Introduction This essay deals with production / manufacturing operations: with their economic impact (or other metrics) while making product with the existing process, usually driven to satisfy: • market demand (delivered: volume, quality) • • economics (incurred: cost savings, resource utilization); and safety (safeguarding equipment, personnel and environment) These drivers represent the main impact of production on company profits, with short-term and long-term effects on the P&L Statement. The bottom line is that most production processes are underutilized; and the use of mature, accessible mathematical technology unlocks that latent capacity, which is of significant value. The best possible performance is “Optimal Operations.” In the process industry it is called “Process Optimization.” In manufacturing it is the extreme of Lean Operations, one of the components of “Lean Manufacturing” success. Other components that qualify for “lean” in the sense of avoiding waste (non-value-added), and not missing opportunities for improvements are: “Lean Design” (the most common emphasis today), “Lean Logistics – and Supply Chain,” “Lean Maintenance,” “Lean Scheduling,” “Lean Safety,” and “Lean Scheduling.” Some share interests with Six Sigma as well (quality and costs). All these solutions are also part of the classical field of......

Words: 3433 - Pages: 14

Production and Operations

...to quality performance, and • To investigate the influence of ISO 9000 implementation to performance measurement. The aim of research is to find out the change in utilization of performance measurement and the trend of selecting measures after implementing ISO 9000. 1. Introduction In the recent years, the business competitiveness has been changed dramatically. Companies began to lose market share to overseas competitors who were able to provide higher-quality products with lower costs and more variety. To regain a competitive edge companies not only shifted their strategic priorities from low-cost production to quality, flexibility, short lead time and dependable delivery, but also implemented new technologies and philosophies of production management such as computer integrated manufacturing (CIM), flexible manufacturing systems (FMS), just in time (JIT), optimized production technology (OPT) and total quality management (TQM)…In this circumstance, the implementation of quality management system is becoming more and more critical for enhancing competitiveness. The ISO 9000 implementation has been accepted worldwide as a useful first step towards Total Quality Management (TQM) and since it’s establish in 1987 until now, the number of organizational that has been certified is growing continuously. The implementation of ISO 9000 is a critical organizational change that requires a transformation in the organization’s, processes, strategic priorities, and culture,......

Words: 9107 - Pages: 37

Production and Operation Management

...Examination Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations......

Words: 1445 - Pages: 6

Production & Operation Management

...Examination Paper of Production and Operations Management IIBM Institute of Business Management Examination Paper Production and Operations Management Subject Code-B107    Section A: Objective Type & Short Questions (30 marks) MM.100 This section consists of multiple choice & Short Notes type questions. Answer all the questions. Part one questions carry 1 mark each & Part two questions carry 5 marks each. Part One: Multiple choices: 1. Production and Operations Management concerns itself with the conversion of: a. Outputs in to inputs b. Inputs in to outputs c. Outputs in to outputs d. None of the above 2. Continuous Production is a. The last operation to the finished product b. The first operation to the finished product c. The mid operation to the finished product d. None of the above 3. Independent demand is a. Demand that is controlled by the company b. Demand that is controlled by the customer c. Demand that is not controlled by the company d. All of the above 4. Enterprise Resource Planning (ERP) has been defined as a a. Complete Enterprise wide business solution b. Complete Enterprise narrow business solution c. a & b d. None of the above 5. CAD stands for a. Computer Architecture Design b. Computer Aided Design c. Computer Aided Drafting d. All of the above 6. Delphi method is the most widely used and accurate method of a. Demand forecasts b. Exponential forecasts 1 IIBM Institute of Business Management Examination Paper of Production and Operations......

Words: 1445 - Pages: 6

Production & Operations Management

... Using Teams in Production and Operations Management Marquita Jackson Dr. Laura Pogue Contemporary Business BUS 508 November 13, 2011 “Production and operations managers oversee the work of people and machinery to convert inputs into finished goods and services” (Boone 357). They must consider many factors such as taxes, employee needs, labor force skills and size, and economical transportations for materials and supplies, and the amount of energy services. These managers are responsible for planning the production process, selecting the most appropriate layout, implementing the production plan, and controlling the production process. Managers are also responsible for maintaining quality control and ensuring that goods or services that they provide meet the customers expectations (Boone 2011). General Electric is a major household brand that revamped and reformed their production and operations management. In 1890, Thomas Edison established the Edison General Electric Company to be able to bring together his various businesses. During that same period, a competitor company, Thomson-Houston Company, became a dominant innovation company. As both businesses expanded and grew it became more difficult for both companies to produce complete electrical installations relying solely on their own patents and technologies. In 1892, the two companies merged together and created a new organization called the General Electric Company. The first General Electric Appliance was an electric...

Words: 1794 - Pages: 8

Production and Operations Managment

...                  Production and Operations Management   Introduction  Improving the operations of a company that will enhance productivity and product quality may not only certainly benefit a company’s bottom line, but can also benefit national interests.  Marathon Oil, for example, is the United States’ “fifth largest transportation fuel refining company and the largest in the Midwest” (“Corporate Profile”).  This Findlay, Ohio based company’s operations “include a six-plant refining network, a comprehensive terminal and transportation system, and extensive wholesale and retail marketing operations” (“Corporate Profile”).  Marathon’s six refineries have a total refining capacity of 1.142 billion barrels per day and provide the United States with approximately seven percent of its total capacity (“About MPC”). Marathon sells 4.1 billion gallons of gasoline each year that are then distributed to over five thousand independently owned and operated Marathon locations (“About MPC”).  Marathon owns Speedway, the fourth largest convenience store chain in the U.S. Speedway not only sells gasoline but also sells food and beverages and a variety of other products in one of its 1350 locations scattered throughout the Midwest (“About MPC ”). To be sure, examining Marathon’s overall product process and identifying those phases which might be improved could result in more efficient refining and distribution of the United States’ life blood: transportation......

Words: 2695 - Pages: 11

Production and Operation Mgt

...Production and Operations Management –MGT613 INTRODUCTION TO PRODUCTION AND OPERATIONS MANAGEMENT VU Lesson 01 POMA Previously called Production Management Then Production and Operations Management Often called Operations Management Should not be confused with Operations Research or Production Management which are the domain of Mechanical and Industrial Engineering. THE COURSE CONTENT Tentative Course Content Units of Learning wise Unit I ( Introduction and Productivity, Strategy and Competitiveness) Unit II ( Forecasting) Unit III ( Design of Production Systems) Unit III ( Quality) Unit V ( Operating and Controlling the System) Tentative Course Content Lecture wise Unit I ( 5 Lectures) Unit II (3 Lectures) Unit III ( 12 Lectures) Unit III ( 10 Lectures) Unit V ( 15 Lectures) History of Management Frederick Taylor and Gilbreths (Lillian and Frank Gilbreth) are pioneers of transforming management to scientific domain. Borrows a lot of information from Engineering and Management to give an overall bigger picture of operating and managing any organization. Difference between Operations Management and Research OR relies on mathematical modeling and OM relies on practical scenarios/industrial cases. OR domain and tool of Engineers while OM is considered to be one of the critical tools of Managers. OR considered more powerful to improve the whole system where as OM can be applied to a part of the system. OR relies on mathematical modeling while OM relies on practical......

Words: 35376 - Pages: 142

Production and Operation Managment

...Semester II Examination Papers IIBM Institute of Business Management Semester-II Examination Paper MM.100 Production and Operation Management Section A: Objective Type (30 marks) • This section consists of Multiple choice questions & Short Notes type questions. • Answer all the questions. • Part One questions carry 1 mark each & Part Two questions carry 5 marks each. Part One: Multiple choices: 1. If the number of restrictions on sources be ‘a’ and the number of restrictions on destinations be ‘b’ then with the use of ‘stepping stone procedure’, the number of ‘used cells’ will be a. a+b+1 b. a+b+2 c. a-b-1 d. a+b-1 2. Value of smoothing coefficient ‘α’ lies a. Between 1 and ∞ b. Between 0 and 1 c. Between -1 and 1 d. Between 1 and 2 3. Forecasting error is a. The difference between forecasted demand and actual demand b. The ratio of forecasted demand and actual demand c. The difference between the standard forecast demand and the evaluated forecast demand d. Ratio of standard forecast demand and the evaluated forecast demand 4. For forecasting the analyzers plot the demand data on a time scale, study the plot and then look for the consistent patterns. Now what does the high noise mean to these patterns a. Many of the point lie away from the pattern ...

Words: 1528 - Pages: 7

Operation Management Assignement

...Answer to question 2: A) Shouldice Other Hospitals 1- Cost of typical operation ( ($ 111x4) + $ 60 + $ 450)= $ 954 $ 2,000 - $ 4,000 2- Transportation $ 200 - $ 600 $ 0 3- Value of time lost to employer • Time lost from work while at hospital Time lost from work while recovering 4 days 5 days 5 days 10 days Assume the value of time lost to employer ranged between $ 80 – 200 per day $ 720 - $ 1,800 $ 1,200 - $ 3,000 4- Subtotal before allowance for recurrence. $ 1,874 – $ 3,354 $ 3,200 – $ 7,000 5- Expected cost of recurrence $ 13 - $ 48 $ 275 - $ 1,150 6- Total cost to patient, employee, and insurer. $ 1,887- $ 3,402 $ 3,475 - $ 8,150 Shuang: I made few corrections below. Shouldice Other Hospitals 1. Cost of typical operation 4 days stay $444 Operation $450 Ass. Surgeon $ 60 Anesthetic $75 (under requirement) Total cost $954 - $1,029 $ 2,000 - $ 4,000 2. Transportation $ 200 - $ 600 $ 200-600 3. Value of time lost to employer • Time lost from work while at hospital • Time lost from work while recovering 4 days 4*80 – 4*200 = 320 - 800 5 -20 days 5*80–20*200 = 400 -4,000 5 – 8 days 5*80-8*200=400-1,600 10 – 40 days 10*80 – 40*200 = 800-8,000 4. Subtotal before allowance for recurrence $1,874 - $6,429 $3400 - $ 14,200 5. Expected cost of recurrence 0.8% $15 - $51 10% $340 - $1,420 6. Total cost to patient, employee, and insurer. $1,889......

Words: 501 - Pages: 3

Production and Operations Management

...Production and Operations Management The Business Enterprise-BUS508 Dr. John Woodard Tammy English Strayer University August 11, 2011 Marathon is an integrated international energy company engaged in exploration and production; oil sand mining; integrated gas; and refining, marketing, and transportation operation. Marathon is among the top five crude oil refineries in the United States, so surely there is a way to reduce the time involved in the production process. The major crude oil refineries in the United States are located in the hurricane region of the gulf coast. One possible option that Marathon could take to reduce the time involved in the production process would be to create new petroleum refineries in different regions allowing operators to shift process and production responsibilities in the event of a natural disaster or scheduled outage. There may be one feasible alternative as to why Marathon would want to reduce the time in the production of the petroleum products. In order to produce gasoline, the crude oil must go through the refinery and transportation processes. In those processes sometime could be saved either by increasing the speed of separation in the crude oil refinery process or by increasing the speed in the transportation process. Crude Oil, like any other product, is traded on the world market. In recent times, crude oil prices have been rocketing, driven by rising global demand and political instability in several oil...

Words: 1013 - Pages: 5

Manteaux en cuir véritable | Polytrol 20 L Ravive Carrosserie Plastique Peinture Alu Chrome Gelcoat Marbre | D.Y.N. Freaks